My own parallel experiences: Okay, I’m doing to date myself here too. I’m also 49 years old, but didn’t start programming until Senior High. First experiences were with Basic on a Xerox Sigma 7 (thanks, Xerox), and a Wang 2200B. Not much learned there.

I learned more during summer vacations, when I paid real money to the University of Rochester to use their mainframe. I discovered that my first APL programs actually worked. I tried my hand at IBM 360 assembly language programming, but debugging was expensive - each assemble/link/run cost over $2. So I started editing the binary object decks on a keypunch instead, reducing the cost of a link/run to something under 80 cents.

While I followed the technology curve and have all the modern development environment power tools, there’s nothing like designing cleanly and understanding what’s going on. To quote Eichhorn:

To write code I just look at my screen and start typing, and to fix code, I just look at my screen some more and type some more. So now, finally, I‘m done with desk checking, right?

Wrong.

I desk check everything. Thoroughly.

And this, to me, is a major league black art which is lost to all those who didn’t have to hand-punch cards and wait a week for their deck to run. It is a lost art, but an essential art, because all the tools which make entering code and editing code and compiling code and running code faster don’t make your code better.

Perhaps it’s related to flurry of articles about GMail CAPTCHA cracking three weeks ago and the resulting surge of spam.

Whatever the reason, it’s a painful outage.

It just works.

Now it’s out of beta. I recommend it. (I’d recommend it even if Techrigy didn’t offer a small incentive to share the experience.)

They offer free wireless for jurors waiting to be called into the court. In the vicinity was the state-run access point, and a host-to-host wireless network calling itself “Free Internet Service”.

What could that be but a man-in-the-middle attacker interested in packet capture? It could have been one of the other jurors. Or a box somebody placed deliberately close to the known public access point.

Due to security fatigue I didn’t even try to gather any information on the rogue. Now my conscience is catching up to me, telling me I should at least tell the Hall of Justice folks, in case this MITM is a permanent installation.

Turning off the one-entry cache cuts 40% from runtime - unless you’re transforming large uniform blocks for which a one-entry cache is actually suitable.

Eliminating the general-purpose byte packing and unpacking functions and replacing them with inline encoding-specific equivalents cuts another 15% of runtime.

Compound savings: 49%, or 2x speedup, which is what someone claimed on an lcms mailing list once without providing the code.

Future work: The cached performance could be made better by observing that all the thread-safe memory locking I find in lcms-1.17 is unnecessary if you assume that thread-local caches on the stack are just fine. Forget the locking, and inline the cache comparisons. I had no need to implement it though, so this is only theoretical.

[If you found this by search engine and it helped you out, drop me a note.]

My prediction for 2008 is that confusion will reign because part of the answer is provided by cable, satellite, or telephone service companies, and their incentive is to maintain confusion because that’s an effective “up-sell” technique.

The simple story is that over-the-air (OTA) analog goes away, replaced by OTA digital. For OTA consumers, it’s just a matter of getting an ATSC tuner (built-in to a newer TV, or standalone with a government-subsidizied coupon).

The part that is different for every locality and service provider: what to do with analog TVs on analog cable systems. For every locality there is a simple cable story: the cable company could tell you their plans for analog channels, e.g. “We’ll continue to carry local channels for our analog customers through [let’s say] 2012.” But the cable companies will generally avoid that story. (I tried to extract it from TWC and they failed the first test, answered the wrong question entirely.)

Why would they tell you a simple “analog on cable is OK for N years” story when they would rather upgrade you to a new digital cable set-top box, and while they’re at it, try to replace your phone too?

So, even if it’s true that analog cable customers will live just fine on the analog cable plant for quite some time, you’ll only see it either in extremely fine print, or omitted as a choice at all in most promotional materials.

Now, it is also true that for bandwidth utilization reasons, the cable companies would like to convert their cable plant to all-digital. If they somehow manage to convert all their cheap $8/month basic cable customers to some fatter bundle, all the better for them. The good thing is that digital OTA tuners will provide competition, so the cable company had better have something that competes with free digital for cheap customers, or they’ll just lose the low end altogether. (The only reason I have basic cable is because my analog OTA reception is poor. Once digital OTA becomes cheap (it’s not yet, standalone tuners are too expensive), I’ll be a digital OTA customer unless cable really makes it worthwhile not to switch. It’s a race to the bottom for my dollar.)

Once they start losing a significant number of customers to digital OTA, then they will start publicizing cheap basic analog and constructing cheap basic digital. But they will wait as long as possible.

I’ve been helpin’ t’ orrrganize a rrregional securrrity conferrrence, th’ second annual Rochesterrr Securrrity Summit, schedul’d ferrr Octoberrr 3 and 4, and a bottle of rum! Good prrresenterrrs, both business and technical trrracks! Some seats be still open, rrregisterrr now! Gar, where can I find a bottle o’rum?

As a security person, I must point out that if machines do not produce a reliable auditable record, then all you have is a fait accompli fraud-blessing device. That’s the short version of the security argument.

I’m willing to go along with NIST that, as of today, all-electronic systems are an important research topic, not a settled present alternative:

The approach to software-independence used in op scan is based on voter-verified paper records, but some all-electronic paperless approaches have been proposed. It is a research topic currently as to whether software independence may be able to be accomplished via systems that would produce an all-electronic voter-verified, independent audit trail (known as software IV systems).

A durable paper ballot requirement is not a retrograde goof, nor a rejection of e-voting. It’s a reflection of current reality, that all-electronic e-voting implementations are asking for trouble. Codifying an allowance for all-electronic systems today would just open the door to arguments about what’s good enough cryptographically, arguments that will be settled by folks even less competent than our representatives. Codifying the well-understood voter-verified paper audit trail as a requirement puts an immediate crimp in the shopping spree for fancy-looking machines that are rotten inside - a shopping spree that will continue if this law isn’t passed, creating an ever-larger lump of sunk investment in pretty bad technology.

A paper audit trail today isn’t a rejection of e-voting, it is progress toward a more robust implementation that in the future will, no doubt, also include other alternative durable auditable records.

For credible background on the security geek consensus, see the above-quoted NIST draft, the US ACM policy recommendation, or Bruce Schneier (University of Rochester physics alumnus!). Or anything by Ed Felten or Avi Rubin on this subject. In this case, our representatives seem to be listening to informed advisers.

Regarding politics: All parties’ oxes have been gored at one time or another by voting fraud or rumors of fraud, so this does seem like an issue on which a consensus could form.

They don’t back up image content yet, but they’re working on it. I haven’t tried using their restore feature to migrate from one platform to another, but it looks like that would be a lot easier than my previous export/import from Radio UserLand to Movable Type to WordPress.